대표자 | 임경택 | 홈페이지 | http://youlim.kr |
---|---|---|---|
주소 | 서울시 구로구 경인로53길 90 STX-W타워 313호 | 부스번호 | 3B-012 |
전화번호 | 02-2679-0989 | 전시품목 | BANDSAW MACHINE (밴드쏘기계) |
유림싸이겐
NC controlled horizantal bandsaws with linear guideways are ideal for mitre cuts with different quantities. With movement of bow it’s possible to cut between 90° and +30°. You can do 10 different programming (lenght and quantity) and can be watched on digital panel. Measurement is done by repeating the stroke accouring to 500 length stroke Cutting capacity at 90° is 540mm x 670mm for flat type and 540 mm for round shaped materials. With auto height adjustment sensors bow approachs the material with fast speed and hydraulic cutting control allows the bow go up over the material after the cut. All this process is controlled mechanical switch. Fixing the bow at any angle is controlled by hydraulical brake system and you can control it by another digital counter placed on main body of machine. As in all Bekamak products in BMSO 540CGH, safety is most important priority and all mechanical and electrical devices are set for best safety mesaures.
유림싸이겐
Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel, cast-iron light and nonferrous material for cutting at only 90°. Complete steel fabricated. The rear jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The front vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted. Once the work piece is clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies
유림싸이겐
The BMSO 325 CH is a fully automatic machine in a two-column design that deal with your mid-section area (round up to 320 mm, flat 350 x 320 mm) ideally suited for cutting solid material , as well as pipes, profiles and beams in steel cutting ! With this machine, only 90 ° cuts are possible! Precision carbide blade guides, and a robust, rigid construction of the machine ensure a precise cut. The basic configuration of this machine includes a full stroke clamping cylinders addition, an infinitely adjustable belt speed. The '34 bandsaw moves a large drive and idler wheel which makes for a longest possible lifetime!
유림싸이겐
semi-automatic double miter for cutting profiles and Solid material in steel
and non-ferrous material and excellent price-performance ratio
robust constructed monoblock saw frame
manually swiveling saw frame with hydraulic clamping for optimal Miter
miter on mobile control panel digitally readable
Hydraulic clamping of the horizontal vise
automatic saw frame raising on the cut end
continuously adjustable belt speed 20-100 m/min BMSY 440 DGH
Sensitive cutting pressure regulation function of the material properties
hydraulic-mechanical belt tension
tape guide with hard metal pads sheets and rolls
thermal overload protection and no-volt release
Automatic shut-off after cut end
automatic belt break protection Driven
Chip brush on impeller