German ultrasonic thickness measuring instrument iron nonferrous glass plastic thickness measuring instrument

Thickness Gauge PCE-TG 300Wide Measurement Range / Up to 600mm / Pulse-Eco or Eco-Eco Mode / For all homogeneous materials / Printing via Bluetooth / USB connection The PCE-TG 300 is a wall thickness meter with special sensors for a wide range of applications. In general, all homogeneous wall thickness materials can be measured with PCE-TG 300. Special sensors can be used for attenuated or scattered materials, such as plastics or castings. The NS angular 90° sensor can also be measured at measurement points that are difficult to reach. Depending on the wall thickness, you can freely set the speed of sound.The gauge PCE-TG 300 is applicable to a wide range of materials.The measurements are displayed directly on the readable TFT color display. The internal memory readable through lets you selectively store available software and other measurement points clearly. Non-destructive ultrasound measurement allows measurement in the final product. The Echo-Echo working mode also allows you to measure the coated workpiece.Wide Measurement Range Various sensors available Battery operation error and void detection Internal measurement data Memory Printed through Bluetooth Measurement Range PE:Pulse Eco Mode 0.65... 600 mm (steel)EE:Eco Eco-mode 2.50 ... 60mm accuracy:± 0.04mm H[mm] (<10mm), ± 0.4% H[mm] (>10mm)H:indicates the material thickness of the measurement.Resolution:0.1mm / 0.01mm / 0.001mm (adjustable) Measurable material Metals:Plastic ceramic epoxy resin glass and all homogeneous material Operation mode:Pulse echo mode (hide layer thickness, e.g. paint) Calibration sound speed correction:Zeroized two-point Interceptor mode:100mm / AutoBoot mode of data with automatic memory transmission.FT LCD Color Display with Brightness Operating Conditions 0... 50°C / 32 ... 122°F, 80 80% RH non-condensing storage conditions -20 ... 70°C / -4 ... 158°F, % 80% rhon-condensing Dimensions 185 x 97 x 40 mm / 7.3 x 3.8 x 1.6 in. Weight 375 g / <1 lb Thickness Gauge PCE-TG 300 Sensor Specifications NO2 Frequency 2.5 MHz Diameter 14 mm Measurement Range 3 ... 40 mm (steel) 3... 300 mm (steel) minimum diameter pipe Not suitable for curved materials Description For attenuation/scattering (plastic, cast iron) NO5 frequency 5 MHz diameter 10 mm measuring range 1 ... 600 mm (Steel) Minimum Diameter Pipe 20x3 mm Description General Measurement Delivery List 1 x Ultrasonic Tester PCE-TG 3001 x Sensor P5EE1 x 100 ml Coupling Gel 1 x Transport Case 4 x AA Battery 1 x User's Manual Made in Germany&ltbr>MB Tech (MB TECH) &ltbr&gtw.mb-tech.kr031-396-8189&ltbr&gt&ltbr&gt